Search

Search

Home / Elite Gear & Axle / Replacement Parts
1983-2014 Fits Ford 8.8" Rearend Solid Pinion Spacer Crush Sleeve Eliminator in Saudi Arabia

1983-2014 Fits Ford 8.8" Rearend Solid Pinion Spacer Crush Sleeve Eliminator

SAR 168
– 1 +

Special Features

  • RSK CSF9
  • Fits Ford 8.8" Rearend (1983-2014 Model Years) (10 Bolt Rear Cover)
  • New high quality solid spacer kit used to adjust pinion bearing preload. Replaces crush sleeve.
  • SOLID SPACER INSTALLATION INSTRUCTIONS: 1. Measure the used Crush Sleeve that was originally in the housing. (if not available start with 3 shims) 2. Add enough Shims to the spacer to achieve a total length that is slightly longer than the used Crush Sleeve. 3. Install Spacer and torque the Pinion Nut to 125 foot pounds. At this point pinion pre-load should be loose. 4. Remove the Spacer and Shims. Reduce this Shim Pack in .002 thickness increments and install until the proper bearing pre-load is achieved.

Description

New high quality solid spacer kit used to adjust pinion bearing preload. Replaces crush sleeve.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}