Flat installation surfaces for perfect support of the telescope; through the smooth side profile; you can easily balance the telescope by shifting
Long bores; countersunk at the downside for cylinder head screws for different adaptions; ideal for building dual mounts or side by side mounts
GP Level dovetail bar with long bores for M6 and 1/4 inch cylinder head screws and 1/4 inch photo thread length 228 mm
Extremly flexible through 9 countersunk bores: three M6 bores at 38 mm distance square on both sides; one in the middle with two drilled but not threaded to accommodate screws up to 6 mm in diameter center to center screw hole spacing is from 35 to 63 mm
Dimensions: 87 mm x 87 mm approx; 116 mm with screw; 9 bores allow connecting to almost all surfaces
Alstar 8-24mm Telescope Zoom Eyepiece - Bundle with - 8 Piece Eyepiece & Filter Accessory Kit
SAR 491
Alstar 8 Piece Eyepiece & Filter Accessory Kit - Bundle with - Red Dot Finderscope
SAR 286
Alstar Telescope Photo Adapter for Nikon SLR/DSLR Cameras - Bundle with - 1.25" Extendable Camera Adapter
SAR 167
-3%
Alstar Telescope Photo Adapter for Minolta AF and Sony A Mount DSLR Cameras - Bundle with - Astronomical T2-Extension Tube Kit
SAR 161
