COMPATIBLE 3D PRINTERS:The PTFE Adapter replacement For Bambu Lab X1C/X1/X1E/P1P/P1S/ 3D Printer（Not For A1 Mini）and the connector is only suitable for PTFE tubes with round holes, not for tubes of other shapes
UPGRADE PRINTING CHANNEL:The 4-in-1 PTFE Adapter is an adapter used to connect the PTFE tube. Compared to the original PTFE tube connector, the 4-in-1 adapter can connect 4 feeder modules to the printer at the same time. (up to 7 different filaments: 1 AMS and other 3 filaments) It can help users to connect the printer to AMS along with other filaments which are not compatible with AMS such as TPU 95A, Bambu PET-CF and other brands' carbon-fiber/glass-fiber contained filaments.
WHEN USING AMS:Connect the PTFE tube from the tool head to the OUT end of the 4-in-1 PTFE Adapter for Bambu lab.Connect the PTFE tube from the buffer output to one of its IN ends. - Directly insert a maximum of three filament wires into each hole of the 4-in-1 PTFE Adapter IN end.make sure that the filament path is smooth, avoiding sharp bends that may over-constrain the PTFE tubes.
WHEN THE AMS IS NOT BEING USED; Connect the PTFE tube from the tool head to the OUT end of the 4-in-1 PTFE Adapter. Directly insert a maximum of four filament wires into each hole of the 4-in-1 PTFE Adapter IN end.
CONVENIENT PTFE TUBE REMOVAL METHOD:When you need to remove the PTFE tube, Step 1:Remove the connector from the extruder and hold it in your hand, Step 2: Rotate the PTFE tube and pull it out after a few turns.Note: The PTFE tube will have scratches left by the adapter gear when it is rotated. Use a cutting knife to cut it off and reconnect it
CUSTOMER SERVICE: If you encounter AMS loading/unloading issues, check the filament path to ensure it is as smooth as possible, without any tight bends. If you have any questions or suggestions after receiving our Product, please contact YIBEICO , We will service for you at first time
1.5m/59Inch 6Pin to 6Pin Extension Cable HUB to AMS for Bambu Lab X1 X1C P1S P1P 3D Printer
SAR 94
AMS Support Shaft Assembly Replacement Fit for Bambu Labs P1P P1S X1C 3D Printer AMS
SAR 68
-6%
2Pcs Hotend Cooling Fan for Bambu lab X1 X1C 3D Printer,Brushless Fan for Printer Cooling,NOT Compatible with X1E P1P P1S and A1 Series
SAR 84
59inch 4Pin AMS Extension Cable for Bambu Lab A1 AMS-Lite Series 3D Printer(Not X1 P1)
SAR 32
