مميزات خاصة

Are you looking for a Led Diode Bright Enough With Correct Resistor (±1% Tolerance) Pre-Wired, 24awg Copper Wires Soldered by Machine(NO Hand Soldering) that WILL NOT Come Apart Easily, A Perfect Replacement for your Dash and Control Illumination.
Overview: Single Color White, Colour: 6000K-9000K (7000K 8000K), Luminous Intensity(Brightness): 18000-20000 mcd, Viewing Angle: 30 Degrees ,Clear Transparent Round 5 mm Small Lens
Voltage: 12 V(5V 6V 9V 12vdc for Different Brightness), Current: 20mA, Wattage: 0.24W( 0.25W ), Polarity: Anode "+" (White Wire) | Cathode "-" (Black Wire) leddiode
Wire Detail: 24awg Tin-Coated Pigtail, Length: 7.9inch / 20cm, Resistor: 560 Ω ohms 0.25W 1/4W(discrepancy: ±1%), Resistor Leg Width: 0.5mm, Pre-Soldered with cable
Compatible with: DIY lighting project (illuminant keyboard, luminous toy and cards), science circuit experiments, signal emmiting indicator,miniature parts replacement, dollhouse, electronics hobby

وصف

Specification:
Quantity: 10 pieces / Packs
Lens: 10mm Diameter / Transparent / Round
Emitting Colour: White 6000K-9000K
Luminous Intensity: 18000-20000 mcd Ultrabright
Viewing Angle: 30 Degree
Forward Voltage / Current: 12 Volt | 20mA
Wattage: 0.24W
Cable Length: 20 cm / 7.9 inch 24awg
Polarity: Anode "+" (White Wire) | Cathode "-" (Black Wire)
Compatible with: DIY lighting project (illuminant keyboard, luminous toy and cards), science circuit experiments, signal emmiting indicator,miniature parts replacement, dollhouse, electronics hobby

مرحبًا،

بحث

ج) أخضر (10 قطع)

مميزات خاصة

وصف

منتجات شبيهه