Search

Search

Home / XIVUIFOI / Surface & Hardness Testing
Danive Stainless Steel Fineness Meter Single Groove Fineness Plate Fineness Gauge 0-100um,DescriptionGroove Size:140×12.5mm in Saudi Arabia Danive Stainless Steel Fineness Meter Single Groove Fineness Plate Fineness Gauge 0-100um,DescriptionGroove Size:140×12.5mm in Saudi Arabia Danive Stainless Steel Fineness Meter Single Groove Fineness Plate Fineness Gauge 0-100um,DescriptionGroove Size:140×12.5mm in Saudi Arabia Danive Stainless Steel Fineness Meter Single Groove Fineness Plate Fineness Gauge 0-100um,DescriptionGroove Size:140×12.5mm in Saudi Arabia Danive Stainless Steel Fineness Meter Single Groove Fineness Plate Fineness Gauge 0-100um,DescriptionGroove Size:140×12.5mm in Saudi Arabia Danive Stainless Steel Fineness Meter Single Groove Fineness Plate Fineness Gauge 0-100um,DescriptionGroove Size:140×12.5mm in Saudi Arabia Danive Stainless Steel Fineness Meter Single Groove Fineness Plate Fineness Gauge 0-100um,DescriptionGroove Size:140×12.5mm in Saudi Arabia

Danive Stainless Steel Fineness Meter Single Groove Fineness Plate Fineness Gauge 0-100um,DescriptionGroove Size:140×12.5mm

SAR 1,102
– 1 +

Special Features

  • 【NOT ONLY FOR PAINT】Paint grind gauge can measure not only the fineness of paint, but also the fineness of coatings,plastics, printing ink and so on. In chocolate, ceramics, paper, medicine, food and other industries, it is also possible to use single groove grinding fineness design for fineness detection.
  • 【0-100μm, INDEX VALUE 5μm】Single groove grindometer: 0-100μm, Scale in microns (μm), the accuracy of fineness plate grooves is ± 1μm.
  • 【READING】Drop some samples on the deeper groove gauge, then scrape them from deeper to low groove. Immediately (not over 5 seconds) observe the tick mark of grain visible in the channel, this numerical value is the fineness.
  • 【READING UNIT: μm】Correspondence between micron (μm) and Hegman (H) as follows: 0 Hegman (100 um), 4 Hegman (50 um), 8 Hegman (0 um)
  • 【HOW TO CHOOSE GRINDOMETER】Choose a grind gauge 5-10um higher than the fineness range you measured. Single groove means only one scraper groove.

Description

DescriptionGroove size:140×12.5mmRange: 0-8 ; 0-100μmGraduation: 0.5,5μmOverall dimensions: 170×50×12mmNumber of grooves: 1

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}