Wall-mounted Important Parameters:
Sealing pressure: 0.4MPA
Shower diameter: 32MM
Material: thick 304 stainless steel
Spray flow: 120-180 liters/min
Light source type: 12L/min
Working pressure: 0.2-0.4MPA
Applicable conditions: normal temperature water or water that meets sanitary standards

Installation method:
1. The installation location should be within 15 meters of the accident-prone place, and it can reach the impact within 10 seconds at a running speed.
Wash place.
2. Wrap the sealing tape at the connection of each part, connect the water pipe and
3. After connecting the inlet and outlet pipes, check whether the ball valve switch is flexibly in place and whether there is jamming.

Instructions:
1. Before use, open the water inlet control valve
2. When washing your eyes, please push the push plate of the eyewash switch in a clockwise direction, the eyewash valve opens, and press the counterclockwise
Pull back the push plate in the direction of the needle, and the eyewash valve closes.