مميزات خاصة

【High-Quality Material】Lab vacuum dryer is made of polycarbonate, suitable for working temperature -40℃～120℃, with high strength and high transparency, it is not easy to crack, and it is convenient to observe the storage state of the internal items at any time.
【Long Storage Time】30 days after vacuuming, the degree of vacuum changes less than 6%. Dry storage under vacuum can greatly extend the storage time.
【High Quality】High-quality polycarbonate injection molding, high-quality silicone rubber O-ring seals between the upper and lower parts of the vessel, better sealing performance.
【Fine adjustment of intake air volume】The valve is a special precision needle valve, which can adjust the intake air volume in a small amount. The exhaust pipe and the needle valve are connected with a quick-change joint for easy operation.
【Apply to】Suitable for vacuum drying and preservation of reagents, optical lenses, precision components, seeds, cultural relics and other items. Anti-oxidation of inert gas vacuum storage materials.

وصف

Product specifications:
Product name: Vacuum dryer
Product material: polycarbonate
Product color: transparent
Product specification: 150mm/250mm
Product use: Plastic container for drying samples

Packing list:
Vacuum dryer*1

Note:
1. Do not expose the vacuum dryer to the following chemicals and their vapors: strong alkalis, esters, aromatic or halogenated hydrocarbons, and ketones. These chemicals may damage polycarbonate.
2. Do not use for autoclaving.
3. It can be cleaned with hot soap or a neutral detergent solution, then rinsed thoroughly with water. Do not use organic solvents, strong alkaline cleaners, or corrosive solvents.
4. Avoid using sealing grease. The top and bottom of the container are sealed with silicone rubber rings.

مرحبًا،

بحث

150 ملم

مميزات خاصة

وصف

منتجات شبيهه