Upgrade Your Vehicle's Steering Performance with the 21-5485 Power Steering Pump
Part Number:
21-5485, 215485, 49110-1AA0A, 49110-9N00A,
49110-JA100, 49110-ZX02A, 49110-ZX70A,
491101AA0A, 491109N00A, 49110JA100,
49110ZX02A, 49110ZX70A, 965485, N9900751, 6048PX
Power Steering Pump Feature:
Effectively reduce resistance to the steering wheel, making the driver easier.
Made of alloy and plastic, test before delivery.
Sophisticated design can match your power steering pump.
Find the failed part, directly replace the new power steering pump.
Compatibility:
for Nissan Altima 2008-2012 V6 3.5L Coupe
for Nissan Altima 2007-2012 V6 3.5L Sedan
for Nissan Maxima 2009-2014 V6 3.5L Sedan
for Nissan Murano 2011-2014 V6 3.5L Convertible
for Nissan Murano 2009-2014 V6 3.5L Sport Utility
Note: This list is a sample of all the compatible cars for this part. Make sure this product fits your car by using the part finder above.
Why choose Farrme Power Steering Pump with Pulley:
1. Superior Quality: Farrme power steering pump is built with exceptional quality and durability, ensuring long-lasting performance and reliability.
2. Efficient Steering Performance: Farrme pump generates the necessary hydraulic pressure to provide efficient and responsive steering assistance, making your driving experience smooth and precise.
3. Enhanced Reliability: We prioritize reliability in our product design, minimizing the risk of sudden failures or leaks, allowing you to drive with confidence and peace of mind.
4. OEM Part Number: This 49110-1AA0A power steering pump is designed and manufactured with OEM standards.
5. Direct Replacement: This steering system pump is a direct replacement product. If your original power steering pump is failing or leaking, this replacement steering pump could be your best choice.
6. Function: The power steering pump with pulley is designed to provide hydraulic assistance to the steering system, making it easier for drivers to turn their vehicle's wheels.
7. Improved Steering Control: The power steering pump enhances steering control by supplying pressurized fluid to the steering gear, reducing the effort required to maneuver the vehicle.
IMPORTANT NOTICE BEFORE INSTALLATION:
①Please verify your vehicle make, model, year, engine, and OEM part number before installation. Contact-us if you're unsure about compatibility.
② Flush the entire power steering system thoroughly before installing the new pump. Contaminated fluid can lead to premature failure.
③ Always replace old O-rings and seals on both high-pressure and return hoses. Reusing worn seals can cause external leaks.
④ Use only the manufacturer-recommended power steering fluid. Mixing fluid types can damage the system.
⑤ Do not overtighten mounting bolts. Excessive torque can crack the pump housing.
⑥ Bleed air from the system by turning the steering wheel fully left and right several times before starting the engine, then repeat after startup.
⑦ Professional installation is strongly recommended. Improper installation may lead to noise, leaks, or loss of power assist.
Signs of a faulty power steering pump(aka: "power assit pump" or "vane pump") include:
① steering fluid leaks
② squealing noise when steering
③ heavy and jerky steering
④ metal flakes in the fluid
⑤ power steering symbol on dashboard
Precautions for installation:
About Noisy:
Check whether the resistance of the suction pipe is too high.
Check whether the pressure adjustment of the safety valve is too high.
The gas in the pump must be evacuated, check the tightness of each joint, prevent air from entering.
About Leaking:
Check whether the pipes and pipe joints are damaged.
Tighten the fixing screws of the booster pump.
Check, clean or replace the filter device, keep the oil circuit unblocked, and avoid the valve core being blocked by foreign matter.
How to install the power steering pump:
1. Ensure the vehicle is stationary and disconnect the negative terminal of the battery.
2. Locate the original power steering pump, typically located near the front of the engine, close to the crankshaft and steering system.
3. Using the appropriate tools, loosen and remove the belt from the original power steering pump, making a note of the belt's routing for future installation.
4. Unbolt or remove the fastening screws of the original power steering pump and take it off the vehicle.
5. Align the new power steering pump with the corresponding bracket or base on the vehicle and secure it in place using bolts or fastening screws.
6. Install the belt correctly on the new power steering pump, following the routing recorded from the original pump.
7. Ensure the belt is properly tensioned.
8. Check the tightness of all installed bolts or fastening screws to ensure the pump is securely mounted.
9. Reconnect the negative terminal of the vehicle's battery.
10. Start the vehicle and check if the power steering pump operates smoothly without any abnormal noises or fluid leaks.