مميزات خاصة

6.5 Inch Speaker Adapter Parameter: 170mm - 6.69"OD, 146mm - 5.75"ID, 16.5mm - 0.65"H. Please verify the exact dimensions of both aftermarket speakers and the OEM mounting location, as sizing may vary across different vehicle models, allow a slight manufacturing tolerance of 1–2mm
Car Speaker Spacer Adapter: Standard 6.5" speaker ring with triangular hole design, widely compatible with Toyota Camry Corolla RAV4 Lexus Scion Older vehicle models, fit for Nissan Ford door speakers. The spacer inner diameter is 5.75 inches for vehicles with mounting hole center distance approximately 128mm - 5.04 inches, not use for JBL or premium audio
Solid Door Speaker Adapter Spacer: 0.65 inches depth spacer ring provide extra mounting space for deeper speakers and upgrade the factory audio, replace speakers featuring medium magnetic circuits. Solid speaker adapters resist deformation or loosening and reduce vibration interference
High-Rebound Speaker Foam Spacer: Standard 6 1/2 speaker foam rings provide a perfect seal between spacer and front rear door panel. These audio gaskets prevent sound leakage, guarantee the cleaner delivery
Package: 2pcs 6.5 plastic speaker adapters, 2pcs 6.5 speaker foam spacers, screws not included

وصف

1.How to Select the Right Car Speaker Spacers
Check the vehicle owner's manual: The speaker size is sometimes listed in the audio system or specifications section.
Online Lookup: Visit well-known North American car audio accessory websites, enter your vehicle details - year, make, model, trim level. The site will precisely list your factory speaker dimensions and recommend perfectly matching speakers and installation accessories.
Manual measurement: Remove the door panel and directly measure the diameter of the factory speaker ID and the mounting hole spacing.
A: If the measurement is 128mm-5.04inches, you will almost certainly need spacer with a 146mm-5.75inches inner diameter.
B: If the measurement is 131mm-5.16inches, you will need spacer with a 149mm-5.87inches inner diameter.

2.6.5 In Car Speaker Adapter Parameters

Solid Plastic Speaker Spacers
Outside Diameter: 170mm - 6.69 inches
Inside Diameter: 146mm - 5.75 inches
Height: 16.5mm - 0.65 inches

Car Speaker Foam Adapters
Outside Diameter: 191mm - 7.52 inches
Inside Diameter: 142mm - 5.6 inches
Height: 25mm - 0.98 inches

3.How to Install
Screw the car speaker to the plastic adapter ring and screw it back on car's door or other mounting places that you need.
Simply clean the surface, peel off the adhesive protective film of foam adapter, and press the ring into car speaker place

4.What's in Package
2 x 6.5 Inch Plastic Speaker Adapters
2 x 6.5 Inch Foam Speaker Spacers

مرحبًا،

بحث

مميزات خاصة

وصف

منتجات شبيهه