All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
Cast integrally with aluminum to ensure the blocks will never crack or become loose even when accidentally dropped. Steel used is selected for the highest magnetic transfer and low retention of magnetic flux
These Magnetic induction block are not magnetized themselves. they are used in combination with a magnetic chuck as an auxiliary tool to hold round bars, flank of plates that are difficult to hold only by chucking
These blocks are placed on a magnetic chuck to induce magnetism to hold workpieces, Magnetism can be induced on two faces of top and side or V face and size
Specially shaped work pieces can also be held by use of chuck blocks, thus making it possible to utilize the chucks in stock
1'' x 2'' x 4'' micro parallels ground all over and serial numbered in pairs
Accusize Industrial Tools 13-18'' Wedge Type Quick Change Tool Post 6 Pc for 300 Cxa, 0251-0333
SAR 1,023
Accusize Industrial Tools 1/2" 5 pc/set Indexable Turning Tool Set (4 Pc Turning + 1 Pc Boring), 2386-0012
SAR 317
Accusize Industrial Tools 3''/80 mm 3-Jaw Chuck, Plain Back, 0.630'' Center Hole, 0559-0110
SAR 668
Accusize Industrial Tools 0.087''-0.094'' by 3.38'' Ncih19-2 Vernier Positive Stop Adjustable Blades for Gtn-2 Inserts, 2402-0002
SAR 189
