Hot Hobby RoadScapes – 1/64 Scale A-Frame Road Barricades (8 Set) Authentic Road & Event Detail for Die-Cast Dioramas and Displays Bring your 1/64-scale world to life with Hot Hobby RoadScapes A-Frame Road Barricades, a precision 3D-printed 8-set pack designed for die-cast scenes, race tracks, construction zones, car shows, and emergency response dioramas. Each barricade replicates the real-world two-bar A-frame design seen across U.S. roads and event sites. These parts are accurately scaled, pre-colored in orange and white, and designed for manual slot-fit assembly — no glue or paint required. Perfect for positioning along race track edges, display lots, and city streets, these barricades add realism and dynamic storytelling to any 1/64 die-cast or model setup. 🛠️ Assembly Instructions (Preventing Breakage) These 1/64-scale barricades are engineered for precision but require a gentle, supported assembly for best results. Recommended Method: Supported Flat-Surface Assembly 1️⃣ Place one A-frame flat on a hard surface with both openings facing upward. 2️⃣ Hold a crossbar near the end and insert it straight down into one of the openings until you feel it seat securely. 3️⃣ Repeat with the second crossbar, keeping the stripes aligned and both bars upright like signposts. 4️⃣ Position the second A-frame flat on the surface, with its openings facing upward. 5️⃣ Flip the partially assembled section (the two crossbars + first A-frame) so that the free ends of the bars are pointing straight down. 6️⃣ Carefully lower the assembly straight down into the second A-frame openings, guiding both ends evenly. 7️⃣ Once seated, use your fingertips to gently press each crossbar into position until fully inserted. Tip: Avoid twisting or side pressure — straight downward alignment ensures a perfect fit and prevents bending. 🔹 Product Highlights True 1/64 Scale Accuracy: Faithfully modeled after two-bar A-frame barricades used for construction, traffic control, and event management. Complete 8-Barricade Set: Includes 8 A-frames and 16 crossbars (builds 8 complete barricades). Pre-Colored and Realistic: Finished in orange and white for instant display realism. Slot-Fit Assembly: No glue required; designed for gentle, friction-fit construction. Professional Craftsmanship: Designed and produced in California, USA for die-cast collectors and diorama hobbyists. Product Specifications: Scale: 1:64 (Die-Cast) Quantity: 8 Barricades (8 A-Frames + 16 Crossbars) Material: PLA Plastic (Orange / White) Assembly: Manual slot-fit, no glue required ⚠️ Safety Warning: Contains small, fragile parts. Not a toy. Intended for adult hobbyists and collectors (Ages 14+).