❉How to Cast a Jewelry Model ?
1. Put it into the vacuum hood. Able to reduce pores & burrs making it flawless
2. Replace the item in the 2L casting chamber. Iniect the prepared molten iron
3. Cooldown the model in the water and take out the semi-finished jewelry
4. Polish the item carefully, then beautifu jewelry is done.

❉Note:
1, Do not continuous melting casting, every two furnace interval time 40-50 minutes, the amount of more recommended to prepare several crucible rotation.
2, The melting point can not exceed 1100℃, commonly used precious metals are within this range, casting temperature can be set, according to the actual situation, do not exceed the melting point too much, so as not to increase unnecessary load.
3. Do not melt and cast metals with high impurities, such as sand gold.
4. Pour out immediately after melting

❉Specifications:
Name: Melting and vacuum casting all-in-one machine
Specification: 2L
Power: 1500W
Measurement accuracy: ±5%FS
Crucible capacity: 130.35 cm³
Steel bell: 3*6inch
Maximum temperature: 1250℃
Size: 36.5*41.6*29.6cm
weight: 20KG
Application: smelting + vacuuming + Suction casting

❉Packing list:
1 X Gold Melting Furnace
All accessories

❉Kind Reminder:
This product is designed for the primary processing of hand-made jewelry. Please read the instructions carefully. If it is necessary for continuous production or mass production, it is recommended to use large power melting casting equipment.