CP2102 solution
1)Single-Chip USB to UART Data Transfer
No external resistors required, no external crystal required
On-chip power-on reset circuit and voltage regulator
Integrated 1024-Byte EEPROM
2) USB Function Controller
USB Specification 2.0 compliant; full-speed (12 Mbps)
USB suspend state, supported via SUSPEND pins
3)UART
All handshaking and modem interface signals
Data formats:Data bits: 5, 6, 7, 8,Stop bits: 1, 1.5, 2,Parity: odd, even, no parity
Baudrates: 300bps to 1Mbps
576 byte receiving buffer; 640 byte transmitting buffer
Hardware or X-On/X-Off handshaking support
Event character support
4)Virtual COM Port Device Drivers
Windows 8/7/Vista/Server 2003/XP/2000. MAC OS-X/OS-9.
Linux 2.40 or higher.
5)USBXpress Direct Driver Support
Windows 7/Vista/Server 2003/XP/2000
Windows CE
6)Temperature Range: –40 to +85 °C

Package Content
CP2102 USB UART Board (Type C) x1
6-pin custom connector jumper wire x1
4-pin male pinheader & 4-pin female pinheader x2