AMERICAN FLAG B-PILLAR STICKER - PERSONALIZATION AND PROTECTION AT THE SAME TIME
Product Attributes
Colors: Black
Individual Size: 19.68 x 9.84 inch
Overall Size: 39.76 x 9.84 inch
Weight: 2.82 oz
Material: PET
Packaging: 2* Car B-Pillar Sticker
Product Feature & Functions
1. Black American flag design is low-key but not lose the sense of power, different from bright colors, black is more calm and atmospheric, suitable for a variety of body colors
2. PET material brings wear-resistant and anti-scratch characteristics, so that the car sticker can withstand the test of daily use. Whether it is a slight bump in the parking lot, or the long-term damage of wind and sand, will not be easily damaged
3. B-pillar will inevitably have small scratches, affecting the car's beauty. This sticker can just cover these small defects, so that the B-pillar looks clean and tidy
Installation Steps
1. Carefully clean the surface of the B-pillar to avoid dust, dirt, oil and other impurities
2. Wait for the surface of the B-pillar to be completely dry, usually natural drying is sufficient, do not carry out the next step in the wet or watery conditions
3. Measure the height and width of the B-pillar with a ruler, and then use scissors to cut the sticker roughly
4. Align the adhesive part of the peeled off backing paper with the top edge of the B-pillar, and then use a squeegee (not included) to gently scrape from the center to the edge of the sticker, so that the sticker can fit the surface of the B-pillar, and slowly continue to peel off the backing paper while scraping until the entire sticker is completely adhered to the B-pillar
Note: Avoid water contact with the vehicle for 24 - 48 hours after installation to allow the sticker to fully adhere to the B-pillar