Get this Truck Hood Support Bracket-Fits International Be200, Ce200 & Ce300 Series, 3577-047-C, Navistar IH3577047C, Automann M55472 for your old truck hood support. This hood support bracket helps your truck hood to be safely opened without slamming. Know more details of this product below:
Application: The support bracket props the hood up and avoid it from falling back down. It also avoids accidental closure, which could lead to serious injury to someone working under the hood.
Compatibility: Check the complete compatibility list:
Fits Navistar: 3577-047-C, 3577-047-C2, 3577047C, 4044825C, IH3577047C
Fits Automann: M55472
Installation Instructions
Locate the mounting points for the existing hood support bracket on the hood and the vehicle's chassis or inner fender.
Remove the old support bracket by unbolting or unscrewing the fasteners that secure it. Keep track of any washers or specific hardware.
Position the new right-hand hood support bracket, aligning it with the original mounting holes.
Securely fasten the new bracket using the original hardware or the hardware provided with the new bracket. Ensure it is tightened appropriately but avoid over-tightening, especially if components are made of softer metals.
Test the functionality by carefully opening and closing the hood, ensuring the support bracket engages and holds the hood securely in the open position.
Safety Considerations
Always ensure the truck is parked on a level surface with the parking brake engaged before working on the hood support bracket.
Never rely solely on the hood support bracket when working under the hood. Use an additional safety prop or support if extensive work is required.
Be cautious of pinch points when operating the hood and the support bracket. Keep hands and fingers clear of moving parts.
Inspect the new support bracket for any damage or defects before installation. Do not install a damaged part.
If the hood feels excessively heavy or doesn't stay open securely after installing the new bracket, re-check the installation and consider seeking professional assistance.
When to Replace Your Truck Hood Support Bracket
The hood fails to stay securely in the open position, posing a safety risk.
The bracket is visibly bent, damaged, or corroded, compromising its structural integrity.
The bracket no longer engages or disengages smoothly, making it difficult to prop the hood open or close it properly.
There is excessive rattling or noise coming from the hood support area while driving, indicating a loose or worn bracket.
Replacement is recommended after any collision damage that may have affected the integrity of the hood support system.