مميزات خاصة

No Extra Drilling: Choose this license plate bracket and say goodbye to the hassle of drilling holes. Provides mounting solutions for front bumpers with limited original holes (2 or none), threaded holes for direct license plate mounting
Stainless Steel & Plastic: Adopting stainless steel as the main material of license plate frame, say goodbye to rust problem, the surface of the material is glossy and bright to enhance the overall visual effect of the license plate, the plastic bracket is impact resistant and more wear-resistant
How to Use: 1. The front plate bracket can be mounted with screws or ties, depending on the bumper's existing hole configuration. 2. Install the license plate. 3. Finally install the license plate frame and use screws etc. to make the final fixing
You Will Receive: Included license plate mounting bracket*1, license plate frame*1, ties*3, start button cover trim ring*1, screw lower cover*4, screw upper cover*4, short flat head screws*4, etc. The included push start button trim ring can decorate your push start button
Size: Total size of license plate frame is 12.28*6.3*0.2 inch, total size of front license plate bracket is 12.01*6.04*0.39 inch. Combination kit of bracket + license plate frame, which keeps the license plate from scratching the car's paintwork after installation. More size reference details

وصف

MAKE LICENSE PLATE INSTALLATION EASY WITH OUR FRONT LICENSE PLATE BRACKET & LICENSE PLATE FRAME KITS

Product Attributes
Colors: Black
Sizes:
License Plate Frame: 12.28*6.3*0.2 inch
Front License Plate Bracket: 12.01*6.04*0.39 inch
Ties: 7.09 inch
Sponge Gasket: 0.8*0.8 inch
Screw Upper Cover: 0.74*0.74*0.3 inch
Short Flathead Screw: Thread Length: 13.37 mm / Thread Diameter: M6
Long Flathead Screw: Thread Length: 15.16 mm / Thread Diameter: M5
Pointed Screws: Thread Length: 15.63 mm / Thread Diameter: M5
Spacer: OD: 0.71 inch / ID: 0.23 inch
Decorative Ring: 1.48*1.48*0.08 inch / ID: 1.19 inch
Weight: 9.09 oz
Material: Plastic, Stainless Steel
Packaging: License Plate Frame*1, License Plate Bracket*1, Foam Pad*8, Tie*3, Screw Lower Cover*4, Screw Upper Cover*4, Short Flat Head Screws*4, Long Flat Head Screws*2, Pointed Screws*2, Beige Snap Fastener*4, Spacer*6, Backing Adhesive*1, Starter Cover Decorative Ring*1

Product Functions & Features
1. Front License Plate Bracket: The special design of the front license plate bracket can solve the problem that your vehicle's front bumper doesn't have drilled holes or only has two drilled holes, easy to install the license plate
2. Decorative Push Start Button Ring: The package comes with a push start button trim ring to decorate your push start button
3. Ties: If your vehicle's front bumper does not have pre-drilled holes, it can help you to fix the license plate bracket
4. Sponge Cushion: Used to play a cushioning effect, to avoid direct contact between the license plate and the license plate frame caused by friction and scratches
5. Screw Cap & Screws: Screw cover can protect your screws, different sizes of screws are used to fix the license plate frame/license plate and license plate bracket (long flat head screws are used to fix the license plate bracket)

Product Installation
1. The front plate bracket can be mounted with screws or ties, depending on the bumper's existing hole configuration
2. Install the sponge cushion, align the license plate holes with the holes of the license plate bracket
3. Install the car license plate frame, align the screw lower cover with the holes, and screw the license plate frame/plate/plate holder for final tightening
4. Attach the screw top cover

مرحبًا،

بحث

مجموعة دعامة لوحة الترخيص الأمامية بدون مثقاب، حامل لوحة الترخيص الأمامية العملي مع خيط يتضمن إطارات لوحات الترخيص/حلقة زخرفية، حامل لوحات تراخيص أمامية للمثقاب

مميزات خاصة

وصف

منتجات شبيهه