Search

Search

Home / Generic / Controls & Indicators
HaoDuoQian 1 Channel 5v Relay Module，8Pcs 5v Relay Board with Optocoupler Support High/Low Level Trigger Compatible with Arduino in Saudi Arabia HaoDuoQian 1 Channel 5v Relay Module，8Pcs 5v Relay Board with Optocoupler Support High/Low Level Trigger Compatible with Arduino in Saudi Arabia HaoDuoQian 1 Channel 5v Relay Module，8Pcs 5v Relay Board with Optocoupler Support High/Low Level Trigger Compatible with Arduino in Saudi Arabia HaoDuoQian 1 Channel 5v Relay Module，8Pcs 5v Relay Board with Optocoupler Support High/Low Level Trigger Compatible with Arduino in Saudi Arabia HaoDuoQian 1 Channel 5v Relay Module，8Pcs 5v Relay Board with Optocoupler Support High/Low Level Trigger Compatible with Arduino in Saudi Arabia HaoDuoQian 1 Channel 5v Relay Module，8Pcs 5v Relay Board with Optocoupler Support High/Low Level Trigger Compatible with Arduino in Saudi Arabia

HaoDuoQian 1 Channel 5v Relay Module，8Pcs 5v Relay Board with Optocoupler Support High/Low Level Trigger Compatible with Arduino

SAR 84
– 1 +

Special Features

  • A—Load Range：NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Trigger current of opto-isolator: 5mA.
  • B—The module can be set high or low triggered by jumper.Module size：50*25*18.5mm.
  • C—Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
  • D— Fault-tolerant design, even if the control line breaks, the relay will not move; With optical coupling isolation, triggering more reliable, more stable.
  • E—Standard interface can be directly connected with microcontrollers. Apply to ARM、PIC、AVR、MCU、Raspberry、CNC machine and PS4 etc.

Description

Specifications:
Relay Type: 5V 1-Channel
TTL gate circuit
Quiescent Current: 5mA
Maximum Current: 190mA
Trigger Current: 3 - 5mA
Trigger Voltage(LOW): 0 - 1.5V
Trigger Voltage(HIGH): 2.5 - 5V
Maximum Load: AC 250V, 10A or DC 30V, 10A
Size: 1.9*1.02* 0.72in(50*26*18.5mm)
Size(L x W x H): 51*26*19mm
Weight: 17g
Relay outputs:
It is low level trigger when jumper connect to LOW pin
It is high level trigger when jumper connect to HIGH pin
Input interface:
DC+: positive power supply (VCC)
DC-: negative power supply (GND)
IN : connection to control relay pickup by high/low level trigger
Output interface:
NO: normally open relay interface；the relay is suspended before the suction, and it is short-circuited with COM after the suction.
COM : common interface of relay switch
NC: normally closed relay interface；and the relay is shorted to COM before the suction is closed.
High and low level trigger options:
Package List:
8Pcs 5V 1-Channel Relay Module

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}