Search

Search

Home / LSMIITTH / Beading & Jewelry Making
Extra Large Metal Melting Ingot Mold - 16KG Molten Brass Container - Made from Steel - 8" x 8" - Casting Mold for Foundry Melting in Saudi Arabia

Extra Large Metal Melting Ingot Mold - 16KG Molten Brass Container - Made from Steel - 8" x 8" - Casting Mold for Foundry Melting 6 INCH Ingot Mold

SAR 350
Size6 INCH Ingot Mold
– 1 +

Special Features

  • This pyramid melting mold is made of steel, it measures 8" x 8" from the top four corners. Height is approximately 7".
  • The steel casting mold is pyramidal with large capacity up to 2L, which could contain 16KG brass / 34.6KG gold / 18.7KG silver / 4.8kg aluminum at a time.
  • Please do not forget to preheat the ingot mold before contain the molten metal. Make sure the containner is completely dry. This is a non-negotiable best practice for a safe, successful cast and to reduce thermal shock.
  • PAY ATTENTION TO THE TIME of TAKING OUT - Please pay attention to the timing of removing the item. Ensure it is taken out as soon as possible after the metal has just solidified and gained a certain strength. Do not wait until the product has completely cooled down. After complete cooling, the product's strength will become higher, making it very difficult to remove. Of course, for best results, apply a high-temperature lubricant (such as anti-seize paste or graphite coating) to the mold surface and welds before each use.

Description

This smelting cone mold measures 8" x 8" from the top four corners. Height is approximately 7".

Preheating is a non-negotiable practice — it removes moisture while also reducing thermal shock. PAY ATTENTION TO THE TIME of TAKING OUT - Please pay attention to the timing of removing the item. Ensure it is taken out as soon as possible after the metal has just solidified and gained a certain strength. Do not wait until the product has completely cooled down. After complete cooling, the product's strength will become higher, making it very difficult to remove. Of course, for best results, apply a high-temperature lubricant (such as anti-seize paste or graphite coating) to the mold surface and welds before each use.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}