Designed and made to fit your gun. Every one is formed on our CNC-machined aluminum molds, built for one handgun. The KYDEX picks up the mold surface exactly, which makes the inside glass smooth and easy on your gun's finish. Tuck your shirt in while carrying The belt loop mounts over your belt and the shell rides inside it, so your shirt can come down over the gun and inside the loop. From the outside it reads as a belt loop, not a holster. Before you order, check two things Your gun and the fitment above need to be exactly the same model. Ordering the wrong one is the most common mistake we see, so read it against your gun, not from memory. Then check if you have a rail mounted light. No WML or Weapon Mounted Light unless the fitment names one. If it does, the shell is molded around the gun and light together and will not hold the gun without that light installed. Inside the waistband only. Cut for a slide-mounted red dot, with an open face for threaded barrels and suppressor height sights. When your new holster arrives The gun should slide in smoothly, without forcing it. Our Posi-Click Retention generates a satisfying click when the gun is properly holstered, so you know it is secure without looking. Then fine tune the retention to your needs. If it feels far too tight or too loose, most likely the wrong gun is being inserted. Trimmed close, adjusts wide A minimalist shell at three ounces of .08 inch KYDEX, cut back to the gun and nothing more. Cant adjusts minus 30 to plus 30 degrees, and the belt loop mounts on either side at standard, shallow or deep ride height, so the same holster works appendix, strong side, hip or small of back. Claw compatible to minimize printing. Right and left hand models carry a full length sweat guard; the ambidextrous model does not. Specs: .08 inch KYDEX, 3 oz, 1.5 inch fiber-reinforced belt loop, black oxide hardware, made in the USA.