Important Note: Confirm your wheel's center hole diameter is 7.2" (183mm) and cap part number matches 9597686/9595152 before purchasing. Measure your old cap or wheel center hole if unsure!

Size Check First: Measure your wheel's center hole diameter with a tape measure – it must be exactly 7.2" (183mm) for a snug fit. Too small/large caps will not stay in place.

Installation Steps:
1.Clean the wheel's center hole (remove dust, dirt, or rust) for a tight seal.
2.Align the cap's retention clips with the wheel's slots (no specific orientation – universal fit).
3.Press firmly around the edges of the cap until you hear multiple "clicks" (confirms clips are locked in place).
4.Retention Check: After installation, tug gently on the cap to ensure it's secure – it should not wiggle or pop out during driving.
5.Weather Protection: The UV-resistant coating prevents damage from rain, snow, and road salt – no need for extra wax or protection.

Fitment:
Replacement for 20" Wheels Only
Replacement for 2007-2013 Chevrolet Avalanche (20" wheels)
Replacement for 2007-2014 Chevrolet Tahoe (20" wheels)
Replacement for 2007-2014 Chevrolet Suburban (20" wheels)
Replacement for Chevrolet Silverado (20" wheels – requires 7.2" center cap size)

Wheel Fit Requirement
Size: Must fit 7.2-inch (182.88mm) diameter wheel center holes
Compatibility: Works with 20" wheels that require a 7.2" same-style center cap (not limited to the listed Replacement for Chevy models)