Features:
- American Flag Window Decal
- High-Quality US Made Vinyl
- 3 Layers Structure
- Carwash Safe

# Step 1
Clean surface thoroughly with soapy water or window cleaner.
Make sure to remove grease and dirt.

# Step 2
Carefully place the decal to the window. Use tape to hold it in place.

# Step 3
First remove the backing paper on one side, then slowly scrape the decal
flat with our squeegee tool, and repeat the previous action on the other
side and make sure it is firmly stuck to the window.

# Step 4
Carefully peel off the transfer paper being especially careful.

# Step 5
After the transfer paper is removed, wrap the scraper with a towel and
reinforce the decal again.

Frequency Asked Questions?

# Why won't the vinyl stick to the surface?
Before installing the decal, the surface must be thoroughly cleaned.
Make sure to clean all the recessed areas to remove grease and dirt.
Wipe clean using a lint-free cloth or rinse with warm water and let the
surface stay dry.

# Can the wrap be removed?
"Qc Decal" vinyl decals are removable and have no effect on the glass.
To remove, heat the material with a heat gun/blow dryer and peel off
piece by piece.

# There are bubbles after applying?
Simply prick them with a needle or pin and rub them out.
They will disappear immediately.