Compound Gauges
1PCS H8 2-17mm Smooth Gauge Smooth Gauge GO and NOGO Inner Diameter Gauge Aperture Gauge Inner HoleGauge High Precision
Note:
1. Before use: Smooth Gauge should be checked and qualified by relevant inspection and metrological institutions before being put into production site use.
2. Use: should pay attention to the test thread tolerance class and deviation code and Smooth Gauge mark tolerance class, the deviation code is the same.
3. After the Smooth Gauge is finished, clean and measure part of the attachment should be cleaned and stored in the specified quantity box. The production site should be placed in the position of the craft fixed position and light gently, so as to prevent the bump and damage the measuring surface. It is strictly forbidden to force screw threads into threads as cutting tools to avoid early wear and en-sure the accuracy of measuring tools.
==========
High-concerned chemical : None
Thread Direction : Right
Number of Pieces : 1
DIY Supplies : Metalworking
Type : Tap
Type : Gauge-Smooth Gauge
Precision : H8